TopBox Mini (Kangertech) Black

The TopBox Mini by Kangertech features the TopTank Mini tank sat atop the sturdy KBox Mini TC 75 box mod. Powered by a single 18650 battery (sold separately), the KBox Mini TC has a maximum power output of 75 watts and its ‘Temperature Control’ modes support Nickel (Ni200), Titanium (Ti), Stainless Steel (SS) and Nichrome (NiCr) wire. The large capacity top-fill TopTank Mini has an adjustable airflow valve, which allows you to adjust airflow according to your preferred vaping style. Included in the starter kit are an RBA Mini Plus and a set of accessories for the RBA. Use the ‘Rebuildable Atomizer’ to build your own coils with the wire material you prefer. An OLED screen, that displays important settings like the coil resistance, voltage, current battery charge, wattage or temperature control setting, along with the fire button and two adjustment buttons are all mounted on one side of the mod. Charge the device via the built-in Micro USB port or using an external battery charger.

Set contents:

• 1x KBOX Mini TC 75W Box Mod
• 1x TopTank Mini Clearomizer
• 1x SSOCC Nickel Ni-200 Atomizer Coil 0.15Ω (Pre-Installed)
• 1 x SSOCC Nichrome Coil 0.5 Ω
• 1 x SSOCC Clapton Coil 0.5Ω
• 1x Mini RBA Plus Deck
• 1x USB Charging Cable
• 1x Set of Replacement Screws
• 1 x Screwdriver Tool
• 1x Pre-Made Micro Coil
• 1x Japanese Organic Cotton Pad
• 1x User Guide

Specifications:

• Wattage Range: 7-75W
• Minimum coil resistance: 0.1Ω
• Temperature Range: 100-315°C

Charging: Via Micro-USB port. Purchasing an external charger is recommended.

How to fill the TopTank Mini:

• Unscrew the top cap
• Pour e-liquid along the tank walls. Do not pour e-liquid into the centre tube.
• Screw the top cap back on
• Tip: Make sure once you unscrew the top cap that you re-fill the tank quickly. Do not leave the top cap open for too long or else gravity will push the e-liquid down through the coil juice holes into the base of the tank, and e-liquid will secrete out of the airflow valve.

How to replace the SSOCC:

• Unscrew the tank from the battery. Turn the tank upside down with the mouthpiece pointing towards the floor.
• Unscrew the base of the tank. The coil is attached to the centre of the base.
• Unscrew the coil and replace it with a new one.
• Allow the coil to soak in e-liquid for 5-10 minutes before firing.

Warning & Disclaimer: This is an advanced item; knowledge of wattage, voltage and coil resistance is necessary. The user must know the risks of lithium batteries and should have knowledge of how to care for them, charge and discharge them, and use them safely before using any device or mod. Never leave charging batteries unattended. Use special caution when working with rechargeable batteries, they are very sensitive to charging characteristics and may explode or burn if mishandled. We will not be held liable or responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any other rechargeable batteries, e-cigarette devices or battery chargers. Please dispose of battery cells, chargers or any other e-cigarette devices in accordance with local laws and mandates.