GS-Air 2 Atomizer (Eleaf)

Eleaf GS Air 2 tank employs Eleaf’s GS Air pure cotton atomizer heads designed to produce rich flavour and thick clouds. Made with durable stainless steel and Pyrex glass, the GS Air 2 features an airflow valve that allows you to customize the mouth to lung (MTL) draw for a tighter or airier draw. Eleaf GS Air 2 is a stylish and compact clearomizer.

Contents
1x Eleaf GS Air 2 Atomizer
1x Eleaf GS Air 2 Pure Cotton Coil 0.75 ohm (8-25W)
1x User Manual

E-liquid Recommendation: High VG
Note: Battery or mod must be capable of firing down to the 0.75 ohm.
Compatible Coils: Eleaf GS Air Coil Series

How to fill the GS Air 2 tank

• Hold the tank upside down, with the mouthpiece pointing towards the floor.
• Unscrew the base of the tank
• Fill the tank by pouring e-liquid along the sides of the tank wall. Do not pour e-liquid into the centre tube.
• Screw the base back onto the tank.

How to replace GS Air 2 coil

• Hold the tank upside down, with the mouthpiece pointing towards the floor.
• Unscrew the base of the tank. The coil is attached to the base of the tank.
• Unscrew the coil and replace it with a new one, make sure it's screwed in tight.

Priming the GS Air Pure Cotton Coil
Your coil needs to be saturated with e-liquid before firing to avoid dry hits. Follow the steps below whenever you install a new (replacement) coil.

1. Drip 2-3 drops of e-liquid onto the exposed cotton through the wick holes on the side of your coil.
2. Install the coil.
3. Close the airflow valve. Fill your tank with e-liquid, attach the tank to your battery.
4. Take 3 gentle draws on your e-cig without activating the battery.
5. Allow the coil to soak in e-liquid for 5-10 minutes.

Warning: Please take the time to read the manual that comes with your GS Air 2 Tank to prevent commonly occurring problems. GS Air 2 tank comes with a sub-ohm coil, i.e. coil with a resistance value lower than 1.0 Ω. The GS Air 2 tank will only work on a mod or battery capable of firing sub ohm coils. Your battery or mod must be able to fire down to 0.75 Ω.

Warranty: DOA. For more information, click here.