Aspire Nautilus 2 is the upgraded version of Aspire’s Nautilus tank. The latest mouth to lung (MTL) tank in the series, Nautilus 2 has a shorter chimney minimising airflow travel to truly bring out the flavour of your favourite e-liquid. Improved airflow control allows you to adjust and fine-tune for a tighter or airier draw. Encased in an anodised metal sleeve that offers protection and a touch of style, the Pyrex e-juice reservoir has a 2 ml e-liquid capacity. Nautilus 2 tank can be completely disassembled for thorough cleaning, features a no mess no fuss top fill system and a removable drip tip. Besides the 1.8 ohm Kanthal Nautilus coil, the Nautilus 2 tank comes with a sub-ohm coil for better flavour and vapour production. Beginners and experienced mouth to lung vapers will appreciate the versatility of the Aspire Nautilus 2 tank.
E-liquid Recommendation
Aspire Nautilus 2 BVC 0.7 ohm: High VG
Aspire Nautilus 1.8 ohm: 50%PG/50%VG or High PG
Contents
1x Aspire Nautilus 2 Tank
1x Aspire Nautilus 2 BVC 0.7 ohm Coil Pre-Installed (18-32W)
1x Aspire Nautilus 1.8 ohm Coil (10-14W)
1x Replacement Pyrex Glass Tube
1x Set of Replacement O-Rings
1x User Manual
Note: Battery or mod must be capable of firing down to 0.7 ohm or lower.
Compatible Coils: Aspire Nautilus 2 BVC & Triton Mini Coils
How to fill the Nautilus 2
- Make sure the airflow valve is closed.
- Unscrew and remove the metal sleeve.
- Pour e-liquid along the sides of the clearomizer wall
How to replace the Nautilus 2 coil
- Make sure the airflow valve is closed.
- Unscrew and remove the metal sleeve.
- Remove the glass tube.
- Unscrew the coil and replace it with a new one, make sure it's screwed in tight.
Priming the Nautilus 2 Coil
Your coil needs to be saturated with e-liquid before firing to avoid dry hits. Follow the steps below whenever you install a new (replacement) coil.
- Drip 2-3 drops of e-liquid onto the exposed cotton through the wick holes on the side of your coil.
- Install the coil.
- Close the airflow valve. Fill your tank with e-liquid, attach the tank to your battery.
- Take 3 gentle draws on your e-cig without activating the battery.
- Allow the coil to soak in e-liquid for 5-10 minutes.
Warning: Please take the time to read the manual that comes with your Nautilus 2 tank to prevent commonly occurring problems. The Nautilus 2 tank comes with a sub-ohm coil, i.e. coil with a resistance value lower than 1.0 Ω. The coil will only work on a mod or battery capable of firing sub ohm coils.
Warranty: DOA. For more information, click here.
We do not ship this product to the following countries:
Belgium | Germany |