Atlantis EVO75 kit (Aspire)

Aspire EVO75 is a sub-ohm starter kit with everything you need to start vaping, except e-juice. The starter kit is made up of the NX75 mod and the Atlantis EVO tank. The NX75 mod delivers a maximum of 75 watts of power. The mod runs on a single 18650 battery (sold separately). Instead of inserting the battery into the mod and slipping a cover over it, the battery fits into a battery compartment which magnetically connects to the mod. Aspire EVO75 has individual buttons for selecting Wattage or Temperature/TCR mode. Temperature mode supports Nickel (Ni200), Titanium (Ti) and Stainless Steel (SS316L) wire. The vivid OLED screen displays the chosen mode, coil resistance, battery life etc. Aspire EVO75 is a fully customizable mod with a built-in ‘Customizable Firing Button Profile’ (CFBP) feature which allows you to fine tune the heat ramp-up setting. The Atlantis EVO tank with improved quad adjustable airflow design works well with high VG e-juice. The top-fill, leak free tank has a 2ml e-juice capacity. Expect thick hearty clouds from the optimised design of the Atlantis EVO tank combined with the 0.4 ohm or 0.5 ohm Kanthal Clapton coils included in the kit. The new coils have larger juice ports and produce more vapour. The 510 threaded Atlantis EVO tank is also compatible with Aspire Atlantis and Aspire Triton coils. Aspire EVO75’s firmware can be upgraded by connecting the mod to your computer with the Micro USB cable included in the set. Aspire regularly releases new features.

Set contents:
1x Atlantis EVO Tank
1x NX75 Mod
1x 0.4Ω Kanthal Clapton coil pre-installed (40-45W)
1x 0.5Ω Kanthal Clapton Coil (35-40W)
1x 2ml Replacement Pyrex Tube
1x Rubber Cuff
1x USB to Micro USB Cable
1x User Manual
1x Warranty Card

Specifications

• Wattage Range: 1-75W
• Output Voltage Range: 0.00-8.50V
• Resistance Range Wattage & Temperature Mode: 0.1-3.5Ω
• Temperature Range: 100-315°C
• Bypass Mode
• Adjustable Fire Time: 5-15s
• Screen: OLED 2.2 cm with customisable logo
• Battery: 3.7V single 18650 high rate discharge battery

Functions:

• Customizable Firing Button Profiles (CFBP) - Fine tune the heat ramp-up setting.

• Temperature Coefficient of Resistance (TCR) - Manually adjust the TCR values for different types of wire; improves the accuracy of temperature control.

• Bypass Mode - The battery operates like a mechanical mod. Instead of using a pre-set power setting, the device will fire the remaining voltage of the battery. Without regulation, the internal circuitry does not boost the charge left in the battery.

Charging: Via Micro-USB port maximum current up to 2A. We recommend purchasing an external charger.

Note:

• Under TC mode SS only supports SS316L coils.
• Although the mod supports ‘passthrough’ charging this will affect the lifespan of the device. We do not recommend vaping while charging

How to fill the Aspire EVO tank:

• Unscrew the top cap
• Pour e-liquid into the tank. Do not pour e-liquid into the centre hole.

How to replace the Kanthal Clapton coil

• Unscrew the base of the tank. The coil is attached to the base of the tank.
• Unscrew the coil and replace it with a new one.
• Prime each new coil before use!
• Allow the coil to soak in e-liquid for 5-10 minutes before firing.

Warning & Disclaimer: This is an advanced item. The user must know the risks of lithium batteries and should have knowledge of how to care for them, charge and discharge them, and use them safely before using any device or mod. Never leave charging batteries unattended. Use special caution when working with rechargeable batteries, they are very sensitive to charging characteristics and may explode or burn if mishandled. We will not be held liable or responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any other rechargeable batteries, e-cigarette devices or battery chargers. Please dispose of battery cells, chargers or any other e-cigarette devices in accordance with local laws and mandates.