Cubis Tank (Joyetech)

Joyetech Cubis Tank is constructed of stainless steel and Pyrex glass. The slightly raised casing protects the glass within but does not obstruct your view of the e-liquid levels. Cubis tank has a brilliant top fill top airflow system which allows you to quickly fill the tank while on the go and completely does away with the risk of leaks at the bottom of the tank. With a broad range of Cubis BF coils available, the Cubis Tank is compatible with a variety of vaping styles and settings.

The included stainless steel (SS316) coils can be used in Variable Wattage (VW), Temperature Control (TC), and Temperature Coefficient of Resistance (TCR) mode with your choice between Direct Lung (DL) or Mouth to Lung (MTL) vaping. The Cubis LVC 1.5 ohm Clapton coil can be used in Variable Wattage (VW) mode and boasts a unique liquid valve control system. Rotate the ring on the bottom of the coil to let in a larger or smaller stream of e-liquid. Joyetech Cubis Tank truly caters to your personal vaping preferences.

Contents 1x Joyetech Cubis Tank 1x Joyetech Cubis BF 0.5 ohm Coil (15-30W) 1x Joyetech Cubis BF 1.0 ohm MTL SS316 Coil (10-25W) 1x Joyetech Cubis BF 1.5 ohm LVC Clapton Coil (8-20W) 1x User Manual

E-liquid Recommendation 

Cubis BF 0.5 ohm DL SS316: High VG 

Cubis BF 1.0 ohm MTL SS316 & 1.5 ohm LVC MTL Clapton: ≥50% PG

Note: Battery or mod must be capable of firing down to the coil’s ohm rating.

Compatible Coils: Joyetech Cubis BF Coils

How to fill the Cubis tank

• Unscrew the top cap from the airflow ring. 
• Pour e-liquid into the tank along the side inlets. Do not pour e-liquid into the centre hole.

How to replace the Cubis BF coil

• Unscrew the top of the atomizer (by holding and twisting the part that includes the airflow control inlets). The atomizer head is located at the base. 
• Unscrew the atomizer head and replace it with a new one.

Priming the Cubis BF Coil 

Your coil needs to be saturated with e-liquid before firing to avoid dry hits. Follow the steps below whenever you install a new (replacement) coil.

1. Drip 2-3 drops of e-liquid onto the exposed cotton visible on the inside of the coil or the juice slots situated at the bottom of the coil. 
2.  Install the coil. 
3. Fill your tank with e-liquid and attach the tank to your battery. 
4. Take 3 gentle draws on your e-cig without activating the battery. 
5. Allow the coil to soak in e-liquid for 5-10 minutes.

Warning: Please take the time to read the manual that comes with your Cubis Tank to prevent commonly occurring problems. Cubis tank comes with a sub-ohm coil, i.e. coil with a resistance value lower than 1.0 Ω. With the 0.5 Ω coil installed the Cubis tank will only work on a mod or battery capable of firing sub ohm coils. Your battery or mod must be able to fire down to 0.5 Ω.

Warranty: DOA. For more information, click here.