eGo One CL-TI Atomizer Head (Joyetech)

The eGo One CL-Ti 0.4 ohm atomizer head with organic cotton wicking material and titanium wire can be used in Temperature Control (TC-Ti) and Temperature Coefficient of Resistance (TCR) mode. Featuring a gold plated connecter for better conductivity, eGo One CL-Ti coil performs best at temperatures above 230℃. eGo One CL Coils have small wick holes, which makes it harder for high VG e-juice to saturate the cotton wicking material. We recommend e-liquid with at least 30%PG for just the right balance between flavour and vapour production.

E-liquid Recommendation: 30% PG/70%VG

Wire Material: Titanium

Compatible Tanks: eGo One, eGo One XL, eGo One Mini, eGo One Mega & eGo One V2

Warning: eGo One CL-Ti 0.4 ohm is designed for use in Temperature Control (TC-Ti) and Temperature Coefficient of Resistance (TCR) mode only. The battery or mod must be capable of sensing and limiting temperature. Do not use Titanium coils in Variable Wattage (VW) mode. The battery or mod must be capable of firing down to the coil’s ohm rating.

Priming the Coil
Your coil needs to be saturated with e-liquid before firing to avoid dry hits. Follow the steps below whenever you install a new (replacement) coil.

1. Drip 2-3 drops of e-liquid onto the exposed cotton through the wick holes on the side of your coil.
2. Install the coil.
3. Close the airflow valve. Fill your tank with e-liquid, attach the tank to your battery.
4. Take 3 gentle draws on your e-cig without activating the battery.
5. Allow the coil to soak in e-liquid for 5-10 minutes.

Coil Life Span
Coils have a limited lifetime based on usage. If your coil does not work properly, replace it. Some coils will last longer than others. Voltage/wattage of battery, e-liquid, type of coil and frequency of use will all play a role in how long the coil lasts. Replace your coil at least once every 2 to 3 weeks for optimal flavour and performance.

Contents: 5x eGo One CL-Ti Atomizer Head (Joyetech)

Warranty: DOA. For more information, click here.