eGrip II 80W 2ml (Joyetech)

eGrip II is a powerful all-in-one mod, part of the Joyetech eGrip line of electronic cigarettes. The sturdy device fits comfortably in your hand. The 2ml TFTA (Top Fill Top Airflow) tank is built into the device and features a child-proof top cap. The coil is attached to the bottom of the top cap. Customise the device by choosing the colour of the LED light that illuminates the e-liquid window while you vape.The kit comes with an atomizer adapter, which closes off the built-in tank and allows you to use an external 510 threaded tank with the device. eGrip II has a 2100mAh internal battery capacity and provides a maximum of 80 watts of power output. A large OLED screen displays important settings like the current mode setting, wattage setting and coil resistance. The device also features a ‘Real Time Clock’, choose between dial display or numerical display. In ‘Temperature Control’ mode the device supports Nickel (Ni200), Titanium (Ti) and Stainless Steel (SS316) wire. ‘Temperature Coefficient of Resistance’ mode allows you to manually adjust the TCR values for different types of wire which improves the accuracy of temperature control. The kit comes with three different coils for various vaping methods. eGrip II’s built-in tank is compatible with coils from the Joyetech BF series. Charge and upgrade the eGrip II by connecting it to your computer via the included Micro USB cable or a wall adapter.

Set contents
1x eGrip II Body
1x NotchCoil™ 0.25Ω DL
1x BF SS316 0.5Ω DL
1x BF Clapton 1.5Ω MTL
1x Atomizer Adapter (for eGrip II)
1x USB to Micro USB Cable
1x User Manual
1x Warranty Card

Specifications

• Wattage Range: 1-80W
• Resistance Range Variable Wattage: 0.1-3.5Ω
• Resistance Range Temperature Mode: 0.05-1.5Ω
• Temperature Range: 100-315°C
• Bypass Mode
• Screen: OLED 2.4 cm with customizable logo and game mode

Functions:

• Temperature Coefficient of Resistance (TCR) - Manually adjust the TCR values for different types of wire; improves the accuracy of temperature control.

• Bypass Mode - The battery operates like a mechanical mod. Instead of using a pre-set power setting, the device will fire the remaining voltage of the battery. Without regulation, the internal circuitry does not boost the charge left in the battery.

How to fill the eGrip II built-in tank:

• Unscrew the top cap; the coil is located at the base of the top cap.
• Pour e-liquid into the tank. Do not fill above the max line.

How to replace the coil

• Unscrew the top cap; the coil is located at the base of the top cap.
• Unscrew the coil and replace it with a new one.
• Allow the coil to soak in e-liquid for 5-10 minutes before firing.
• Joyetech recommends priming each new coil before use!

Note:

• TC SS316 mode is specifically designed for SS316 coils. Joyetech recommends using the BF SS316 coil.
• Although the mod supports ‘passthrough’ charging this will affect the lifespan of the device. We do not recommend vaping while charging.

Warning & Disclaimer: This is an advanced item; knowledge of wattage, voltage and coil resistance is necessary. The user must know the risks of lithium batteries and should have knowledge of how to care for them, charge and discharge them, and use them safely before using any device or mod. Never leave charging batteries unattended. Use special caution when working with rechargeable batteries, they are very sensitive to charging characteristics and may explode or burn if mishandled. We will not be held liable or responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any other rechargeable batteries, e-cigarette devices or battery chargers. Please dispose of battery cells, chargers or any other e-cigarette devices in accordance with local laws and mandates.