Due to its incredibly small size and simple one button operation, the iNano is a handy, discreet all-in-one starter set for beginners. The diminutive, mod shaped electronic cigarette has a built-in 650mAh battery capacity. The 0.8ml tank fits magnetically into the body of the pocket-sized mod, simultaneously protecting the tank from damage while increasing portability. Two transparent windows on either side of the device allow you to see the remaining e-juice level. Charge the iNano via the built-in USB port.
Set contents:
1×iNano Disposable Tank (1.2Ω)
1×iNano Body
1×iNano Connector
1×USB Cable
1×User Manual
Note: The coil is not replaceable. When the coil stops working, dispose of the tank and replace it with a new one.
How to fill the iNano Disposable Tank:
- Pull the tank out of the device
- Unscrew the top section (attached to the mouthpiece) of the tank.
- Fill the tank by pouring e-liquid along the sides of the tank wall. Do not pour e-liquid into the centre tube.
- Screw the top section back onto the tank.
- Allow the coil to soak in e-liquid for 5-10 minutes before firing.
Warning & Disclaimer: This is an advanced item; knowledge of wattage, voltage and coil resistance is necessary.The user must know the risks of lithium batteries and should have knowledge of how to care for them, charge and discharge them, and use them safely before using any device or mod. Never leave charging batteries unattended. Use special caution when working with rechargeable batteries, they are very sensitive to charging characteristics and may explode or burn if mishandled. We will not be held liable or responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any other rechargeable batteries, e-cigarette devices or battery chargers. Please dispose of battery cells, chargers or any other e-cigarette devices in accordance with local laws and mandates.
