iStick Pico 75W TC Full Kit (Eleaf)

PICO stands for Preferrable, Innovative, Compact and Outstanding. The iStick Pico is a tiny pocket-friendly starter set that lives up to its name. The iStick PICO mod has a maximum power output of 75 watts and runs on a single 18650 battery (sold separately). Unscrew the battery cap and slip the battery into the mod. Choose between Variable Wattage mode, Bypass mode, Temperature Control and TCR mode. Temperature Control supports Nickel (Ni200), Titanium (Ti) and Stainless Steel (SS) wire. The adjustment buttons are located at the bottom of the device. Paired with the Melo III Mini tank this set is truly compact. The Melo III Mini holds 2ml of e-juice and features hidden airflow control. For your convenience, the tank can be taken apart completely for thorough cleaning or should you need to replace the glass. Charge and upgrade the device via the built-in USB port.

Set contents:
1x iStick PICO
2x Melo III Mini Atomizer
1x EC 0.3Ω coil
1x EC 0.5Ω coil
4x Seal Ring
1x Micro USB to USB Charging Cable

Specifications:

• Wattage Range: 1-75W
• Resistance Range Wattage & Bypass Mode: 0.1-3.5Ω
• Resistance Range Temperature Mode: 0.05-1.5Ω
• Temperature Range: 100-315°C
• Battery: 18650 high rate discharge battery (≥25A)

Functions:

• Temperature Coefficient of Resistance (TCR) - Allows you to manually adjust the TCR values for different types of wire which improves the accuracy of temperature control.

• Bypass Mode - Allows the battery to operate like a mechanical mod. Instead of using a pre-set power setting, the device will fire the remaining voltage of the battery. Without regulation, the internal circuitry does not boost the charge left in the battery.

Charging: Via Micro-USB port maximum current 1A. We recommend purchasing an external charger.

How to fill the Melo III Mini Atomizer:

• Unscrew the top cap (attached to the mouthpiece)
• Pour e-liquid into the tank along the side inlets. Do not pour e-liquid into the centre hole.

How to replace the EC coil:

• Unscrew the base of the atomizer. The coil is attached to the base.
• Unscrew the coil and replace it with a new one.
• Drip e-liquid directly onto the wick of the coil.
• Allow the coil to soak in e-liquid for 5-10 minutes before firing.

Warning & Disclaimer: This is an advanced item; knowledge of wattage, voltage and coil resistance is necessary.The user must know the risks of lithium batteries and should have knowledge of how to care for them, charge and discharge them, and use them safely before using any device or mod. Never leave charging batteries unattended. Use special caution when working with rechargeable batteries, they are very sensitive to charging characteristics and may explode or burn if mishandled. We will not be held liable or responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any other rechargeable batteries, e-cigarette devices or battery chargers. Please dispose of battery cells, chargers or any other e-cigarette devices in accordance with local laws and mandates.