iStick Pico X with Melo 4 Clearomizer Starter Kit (Eleaf)

The Eleaf iStick Pico X Kit combines the 75 watt Pico X MOD with the Melo 4 sub-ohm clearomizer utilising Eleaf mesh coils. Featuring a new intelligent wattage reading system, the Pico X automatically detects the resistance of the installed coil and recommends an appropriate wattage. The Eleaf iStick Pico X Kit is ideal for vapers looking to upgrade to a powerful DL device

Eleaf iStick Pico X Starterset
1x Eleaf iStick Pico X Box MOD
1x Eleaf Melo 4 Clearomizer
1x Eleaf ECM 0.15 ohm
1x USB Cable

Eleaf iStick Pico X MOD
Small, compact and incredibly lightweight, the Eleaf iStick Pico X MOD comes wrapped in soft-touch rubber for a comfortable grip. Powered by a single (1) 18650 battery (sold separately), the iStick Pico X MOD features intelligent wattage reading. Attach the tank, and the Pico X automatically recommends a wattage setting. In Variable Wattage mode, manually adjust the wattage using the adjustment buttons located at the bottom of the device. Set the Pico X Mod tot Temperature Control mode to regulate your nickel, titanium or stainless steel coils' temperature. Customise the temperature of the vapour to your preference and eliminate the chance of dry or burnt hits.

A bright OLED screen displays the current temperature setting, output wattage, output voltage, coil resistance, and remaining battery life. Charge and upgrade the device using the included USB cable or purchase an extra battery and external battery charger, so you never run out of juice!

iStick Pico X MOD Specifications

• Compatible Coil Range
  Variable Wattage: 0.1 – 3.5 ohm
  Temperature Control: 0.05 – 1.5 ohm
• Wattage Range: 1W – 75W
• Temperature Range: 100°C - 315°C (200°F-600°F)
• TC/TCR: Nickel 2000 (Ni), Titanium (Ti) & Stainless Steel 316 (SS) Coils ONLY
• Threading: 510
• 18650 Battery Recommendation: 25A or higher
• Charging: Charge using micro-USB port. Wall adapter max charging current 1A/1000mA. External charging always recommended.
• Suitable for tanks with max 22mm diameter

iStick Pico X MOD Settings

• Temperature Control (TC) - Fine-tune the temperature of the vapour for a more flavourful hit; eliminates the chance of dry hits or burnt coils.
• Temperature Coefficient of Resistance (TCR) - Manually adjust the TCR values for different types of wire; improves the accuracy of temperature control.
• Preheat function

Eleaf Melo 4 Tank
The 2ml Pyrex glass Melo 4 tank features top-fill for easy filling on the go and bottom airflow control. Customise the air intake for a tighter or airier draw. This kit includes Eleaf EC-M coils. The M stands for the mesh structure inside the coils, which offers a larger surface for better and more even heat distribution. Paired with these coils, the Melo 4 tank produces great flavour and massive clouds.

Eleaf Melo 4 Tank Specifications

• Tank Capacity: 2 ml
• Wire Material Coils
  EC-M 0.15 ohm: Kanthal suitable for VW
• Wick: Pure Cotton
• Recommended Wattage
  EC-M 0.15 ohm coil: 30W – 75W
• Threading (Tank & Drip Tip): 510
• Compatible Coils: Eleaf EC series

E-liquid Recommendation
High VG
70% VG or higher

How to Fill the Melo 4 Tank

• Close the airflow valve
• Slide open the top cap to reveal the wide filling port
• Pour your e- liquid into the reservoir tank
• Slide the cap closed

Note: Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage to the coil.

How to replace the Eleaf EC-M Coil

1. Drip a few drops of e-liquid directly into the coil, before first use.
2. Detach the base from the tank
3. Screw the new coil onto the base
4. Attach the glass tube