The iStick Power Nano 40W TC Set is a pint-sized and remarkable device. The mod features an 1100mAh internal battery with a maximum power output of 40 watts. Choose between Variable Wattage, Bypass, Temperature Control and TCR. Temperature Control supports Nickel (Ni), Titanium (Ti) and Stainless Steel (SS) wire. The iStick Power 40W with 510 threading is compatible with a wide variety of tanks. The mod’s Smart Mode automatically reads the resistance of the atomizer and allows you to save a specific output setting. When you switch between tanks with different coils, this clever device loads the saved setting.
In the iStick Power Nano 40W TC Set, the iStick Power is paired with the Melo III Nano. The tank with 2ml e-liquid capacity features hidden airflow control. The set comes with a 0.75 ohm ECML coil specifically designed for mouth to lung vaping. For your convenience, the tank can be taken apart completely for thorough cleaning or should you need to replace the glass. Charge and upgrade the device via the built-in USB port.
Set contents:
1x iStick Power 40W
2x Melo III Nano Atomizer
1x ECML 0.75Ω coil
1x EC 0.3Ω coil
1x Seal Ring
1x Micro USB to USB Charging Cable
Specifications:
- Wattage Range: 1-40W
- Resistance Range Wattage/ Bypass Mode/Smart Mode: 0.1-3.5Ω
- Resistance Range Temperature Mode: 0.05-1.5Ω
- Temperature Range: 100-315°C
Functions:
- Temperature Coefficient of Resistance (TCR) - Allows you to manually adjust the TCR values for different types of wire which improves the accuracy of temperature control.
- Smart Mode - Automatically reads the resistance of the atomizer and allows you to save a specific output setting. When you switch between tanks with different coils, this clever device loads the saved setting.
- Bypass Mode - Allows the battery to operate like a mechanical mod. Instead of using a pre-set power setting, the device will fire the remaining voltage of the battery. Without regulation, the internal circuitry does not boost the charge left in the battery.
Charging: Via Micro-USB port maximum current 1A. We recommend purchasing an external charger.
How to fill the Melo III Nano:
- Unscrew the top cap (attached to the mouthpiece)
- Pour e-liquid into the tank along the side inlets. Do not pour e-liquid into the centre hole.
How to replace the ECML coil:
- Unscrew the base of the atomizer; the coil is attached to the base.
- Unscrew the coil and replace it with a new one.
- Allow the coil to soak in e-liquid for 5-10 minutes before firing.
Warning & Disclaimer: This is an advanced item; knowledge of wattage, voltage and coil resistance is necessary.The user must know the risks of lithium batteries and should have knowledge of how to care for them, charge and discharge them, and use them safely before using any device or mod. Never leave charging batteries unattended. Use special caution when working with rechargeable batteries, they are very sensitive to charging characteristics and may explode or burn if mishandled. We will not be held liable or responsible for any damage, injury, or defect caused by the improper use and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any other rechargeable batteries, e-cigarette devices or battery chargers. Please dispose of battery cells, chargers or any other e-cigarette devices in accordance with local laws and mandates.
