Triton Mini Tank 2ml (Aspire) Black

Aspire Triton Mini Tank is a durable clearomizer with a 20mm width sure to compliment whichever battery or MOD you’re using. Constructed of high-grade stainless steel and Pyrex glass, Aspire’s Triton Mini Tank delivers in terms of cleaner flavour and durability. The 510 threaded Triton Mini tank has a 2ml e-liquid capacity and adjustable airflow; fine-tune the air intake according to your preference. Triton Mini’s top-fill system is straightforward and easy to use. The removable drip tip with standard 510 threading allows you to customise the tank. Aspire has a range of coils made specifically for the Triton Mini but the tank is also compatible with Aspire Nautilus, Aspire Nautilus Mini and Aspire Nautilus 2 coils.

Contents
1x Triton Mini Tank
1x Triton Mini 1.8 ohm Clapton Coil Pre-Installed (13-16W)
1x Triton Mini 1.2 ohm Kanthal Coil (15-20W)
1x Replacement Pyrex Glass Tube
1x User Manual

E-liquid Recommendation: 50%PG/50%VG or High PG

Compatible Coils: Triton Mini Coils, Nautilus 2 Coils, Aspire Nautilus Mini Coils, & Nautilus Coils.

How to fill the Triton Mini tank

• Make sure the airflow valve is closed.
• Twist the part underneath the drip tip and set it to fill (water drop)
• Remove the drip tip
• Pour e-liquid along the tank walls. Do not pour e-liquid into the centre hole.
• Reattach the drip tip
• Twist the part underneath the drip tip and set it to vaping mode (face exhaling vapour)

How to replace the Triton Mini coil

• Unscrew the tank from the mod. Turn the tank upside down with the mouthpiece pointing towards the floor.
• Unscrew the base of the tank. The coil is attached to the centre of the base.
• Unscrew the coil and replace it with a new one.

Priming the Coil
Your coil needs to be saturated with e-liquid before firing to avoid dry hits. Follow the steps below whenever you install a new (replacement) coil.

• Drip 2-3 drops of e-liquid onto the exposed cotton through the wick holes on the side of your coil.
• Install the coil.
• Fill your tank with e-liquid, attach the tank to your battery.
• Take 3 gentle draws on your e-cig without activating the battery.
• Allow the coil to soak in e-liquid for 5-10 minutes.

Warranty: DOA. For more information, click here.